5.1 PREPARING THE MINER FOR THE DIVE

• Flash the miner with the BiXBiT firmware that matches your device.
• Flash the power supply of the miner with BiXBiT firmware for the corresponding model or prepare a suitable fan simulator (“trick”).
• Turn off and remove the main fans of the miner ①, ②
• Open the power supply cover and remove the fan ③
  If it is impossible to flash the power supply at the previous stages, install the fan simulator in the appropriate slot ④.

• Clean the elements of the case and the board of the miner from dust and dirt.
• Immerse the miner in the immersion liquid.