Ведется подсчет
результатов!
Скоро мы объявим
победителя

Скачал прошивку, установил. Все круто работает. Добавил AMS на компьютер и телефон для удаленного контроля, в плане информативности и управления тоже все на уровне.С разгоном скажу честно пока проблемы, стою в показателях завода, чуть меньше, думаю проблемы в сети. Будем решать. Скакать по прошивкам пока не планирую, нужно все досконально изучить, после чего только буду принимать решение по переносу мощностей на данную прошивку и AMS управления. Один асик пока точно будет стоять в этой теме обновляться, расти изменятся а там время покажет....

First of all, thank you BiXBit for making the first bug bounty for miners! And for the great prizes. I installed firmware to overclock a Whatsminer m5x. It’s officially working! The dev fee is maybe a little bit high, but it’s still a good deal. My hashrate is up by maybe 20%. The interface for the monitoring system is very well done. It’s really easy to see what’s going on with each ASIC even when you are out and about. For example, I found out that I had hashrate problems (went up and down) because of the internet connection, and I changed the provider. Don’t be afraid of installing a BixBit firmware. It’s easy to set up and safe. With this market you really need overclocking!

Been mining with an Antminer T17 or a year but it’s the first time that I tried a custom firmware. Exceeds expectations! It didn’t quite give me +30% to the hashrate as the website says, but maybe +23%. In terms of profitability, the increase easily covered the dev fee. For the AMS: also definitely a useful thing to have. I had one hashrate drop while I was away, so with the system I could see that it was happening and fix it asap. I can imagine that it makes a huge difference if there’s an electricity issue, temperature spike etc. Overall, I recommend BiXBiT AMS and firmwares – it’s worth it 100%.

I've been using bixbit firmware for a few weeks, and a problem I've seen during this time on cgi-miner's page, in the pool section of the DevFee, when I notice the DevFee's address is dead and the accepted value is zero and the rejected value increases regularly