Fully-equipped technological BiXBiT rack is the next-level modular design. Being a part of a finite modular infrastructure, the rack is a self-sufficient unit for computing equipment placement. A Rack is a second-level modular product. It is designed for miners with capacities of middle scales.Vertical design of the rack allows to accommodate at least 2 times more equipment than it would be possible with a horizontal layout. Moreover such design provides an easy access to the equipment which is important when replacing equipment. In basic configuration, the rack is equipped with all necessary facilities and an automatic process control system . It is not provided with a cooling tower and assumes 100% heat removal for domestic and industrial needs. The rack in a basic configuration can serve as an additional source of heat to warm office buildings, greenhouses, etc.
Fully-equipped rack is a self-sufficient unit, which implies either full or partial utilization of the heat generated by the equipment (in case of partial utilization, the rack is provided with a cooling tower). All the processes in installation are monitored and controlled remotely, which prevents the computing devices failure. The main principle of the rack is lack of attention to the functioning installation without risks. The rack offers a new approach to mining farms cooling.
For operation, the system must be equipped with specialized components in the form of motherboards and power supplies. Optional: RAM and SSD. For more information contact email@example.com
Rack is a self-sufficient unit for computing equipment placement and was designed to solve most of the existing problems in mining industry. Containers can be removed to any place, for example, to regions with the lowest electricity rate. Equipment is stored in slide-out cells, which provides an easy access to the devices and makes it possible to replace the equipment quickly, if needed. The rack is equipped with an automatic process control system (enternalduck), which reacts to any changes in the regular mode processes and informs of any equipment failures. The rack is equipped with all the necessary facilities for heat utilization. It is possible to utilize heat completely or partially (from 0% to 100%). In case of partial heat utilisation the rack is provided with a cooling tower. Being a self-sufficient unit for the mining equipment placement, the rack can serve as is the main component of a more scalable mining solution.