scroll down
BiXBiT Cell
Watch Video
Watch 3D tour
  • BiXBiT Cell
    {{ item.size_title }} BiXBiT Cell
    BiXBiT Cell
  • BiXBiT Cell
    BiXBiT Cell
    BiXBiT Cell

Basic cell version without a cooling tower. Requires full and constant heat transfer, e.g for heating purposes. The setup offers additional income through safe and sustainable overclocking as well as heat recycling for own or commercial needs. Capacity: Up to 24 graphics cards / fpga or up to 6 ASICs.

Full version of the cell with a cooling tower. Enables regulation of the generated heat recycling mode as needed. Example: The cell connects to the house heating system and warms the water at certain hours, thereafter the cooling tower is activated to remove the excess thermal energy from the cell. Capacity: Up to 24 graphics cards/fpga or up to 6 ASICs.

Immersion cooling allows overclocking of mining devices to their maximum speeds without their overheating. The liquid coolant evenly removes the heat from all hot spots of the equipment making it run at maximum efficiency under the most optimal conditions.
The heat generated by the miners can be reused for your own or commercial purposes. The mining module integrates into the heating system and redirects the heat to where it is needed: maintaining the room temperature, underfloor heating, warming the pool, breeding of heat-loving fish, animals, drying wood, clothes, etc.
Immersion medium protects the devices from temperature spikes and from the environment, significantly extending the lifespan of the equipment. Fans, as components with a breakdown risk factor, are dismantled and left unused.
Persistent and intense sound levels have a negative impact on human health. This becomes especially important for employees at large mining facilities. Keeping miners in closed cells and submerged in immersion liquid eliminates noise, as well as protects them from dust and outside debris, making periodic farm shutdowns for maintenance unnecessary.
Traditional air cooling often requires installation of additional air conditioning and filtration systems. Immersion cooling eliminates such extra expenses and energy waste. The absence of fans in miners also saves about 5% of the total energy consumption.
up to:
  • +40%
    HASHRATE
    increase
  • +100%
    SMART HEAT
    UTILIZATION
  • +200%
    EQUIPMENT
    LIFESPAN
  • -100%
    NOISE AND
    DUST
  • -30%
    POWER
    CONSUMPTION
Equipment:
Cooling:
Size:
Specifications
  • Holding capacity
    3 S17/S19/M30S/M50S
  • Dimensions
    811 x 640 x 460
  • Water consumption
    0.33 m 3/h
  • Water inlet temperature
    15°С
  • Water outlet temperature
    50°С
  • Supported mining power
    12kW
  • Holding capacity
    6 S17/M30S/M50S
  • Dimensions
    871 x 730 x 475
  • Water consumption
    0.57 m 3/h
  • Water inlet temperature
    15°С
  • Water outlet temperature
    50°С
  • Supported mining power
    24kW
  • Holding capacity
    6 S19
  • Dimensions
    680 х 915 х 480
  • Water consumption
    0.75 m 3/h
  • Water inlet temperature
    15°С
  • Water outlet temperature
    50°С
  • Supported mining power
    30kW
  • Holding capacity
    3 S17/S19/M30S/M50S
  • Dimensions
    811 x 640 x 460
  • Water consumption
    N/A
  • Water inlet temperature
    40°С
  • Water outlet temperature
    55°С
  • Supported mining power
    12kW
  • Holding capacity
    6 S17/M30S/M50S
  • Dimensions
    871 x 730 x 475
  • Water consumption
    N/A
  • Water inlet temperature
    40°С
  • Water outlet temperature
    55°С
  • Supported mining power
    24kW
  • Holding capacity
    6 S19
  • Dimensions
    680 х 915 х 480
  • Water consumption
    N/A
  • Water inlet temperature
    35°С
  • Water outlet temperature
    50°С
  • Supported mining power
    30kW
  • Holding capacity
    24 GPU/FPGA
  • Dimensions
    811 x 640 x 460
  • Water consumption
    0.12 m 3/h
  • Water inlet temperature
    15°С
  • Water outlet temperature
    50°С
  • Supported mining power
    6.4kW
  • Holding capacity
    24 GPU/FPGA
  • Dimensions
    811 x 640 x 460
  • Water consumption
    N/A
  • Water inlet temperature
    15°С
  • Water outlet temperature
    50°С
  • Supported mining power
    6.4kW
Configuration
  • BiXBiT Firmware
  • Cell with lid
  • Supports for installing miners
  • Heat exchanger
  • Pump for internal circuit
  • Electrical cell strapping
  • Switch
  • Temperature sensor
  • Electric control cabinet
  • Cooling tower
  • BiXBiT Firmware
  • Cell with lid
  • Supports for installing miners
  • Heat exchanger
  • Electric control cabinet
  • Pump for internal circuit
  • Electrical cell strapping
  • Hydraulic cell strapping
  • Switch
  • Temperature sensor
  • Cooling tower
  • BiXBiT Firmware
  • Cell with lid
  • Supports for installing miners
  • Heat exchanger
  • Electric control cabinet
  • Pump for internal circuit
  • Electrical cell strapping
  • Hydraulic cell strapping
  • Switch
  • Temperature sensor
  • Cooling tower
  • BiXBiT Firmware
  • Electric control cabinet
  • Cooling tower
  • Cell with lid
  • Supports for installing miners
  • Heat exchanger
  • Pump for internal circuit
  • Pump for external circuit
  • Frequency converter for cooling tower
  • Switch
  • Temperature sensor
  • Hydraulic cell strapping
  • Electrical cell strapping
  • BiXBiT Firmware
  • Cooling tower
  • Cell with lid
  • Supports for installing miners
  • Heat exchanger
  • Pump for internal circuit
  • Electric control cabinet
  • Pump for external circuit
  • Frequency converter for cooling tower
  • Switch
  • Temperature sensor
  • Electrical cell strapping
  • Hydraulic cell strapping
  • BiXBiT Firmware
  • Cooling tower
  • Cell with lid
  • Supports for installing miners
  • Heat exchanger
  • Pump for internal circuit
  • Electric control cabinet
  • Pump for external circuit
  • Frequency converter for cooling tower
  • Switch
  • Temperature sensor
  • Electrical cell strapping
  • Hydraulic cell strapping
  • Cell with lid
  • Electric control cabinet
  • Heat exchanger
  • Pump for internal circuit
  • Electrical cell strapping
  • Switch
  • Temperature sensor
  • PSU 1800 W
    3pcs
  • Cooling tower
  • Motherboard
    3pcs
  • Cooling tower
  • Cell with lid
  • Electric control cabinet
  • Heat exchanger
  • Pump for internal circuit
  • Electrical cell strapping
  • Pump for external circuit
  • Frequency converter for cooling tower
  • Switch
  • PSU 1800 W
    3pcs
  • Temperature sensor
  • Motherboard
    3pcs
  • Hydraulic cell strapping

For operation, the system must be equipped with specialized components in the form of motherboards and power supplies. Optional: RAM and SSD. For more information contact [email protected]

Start mining with comfort

BiXBiT immersion cooling kit is designed for any indoor use, including residential premises. It is an environmentally friendly mining farm with a safe coolant. Occupies a minimum of space and doesn't make any noise. All electrical and technical components are hidden inside the case. It protects equipment from overheating, dust, insects and instability of operation.

Bitcoin mining profitability

This graph shows the Bitcoin profit from using the ASIC immersion cooling tank with 6x Antminers S9 excluding cost of electricity. BiXBiT infrastructure improves the performance of miners by up to 40% of basic hashrate values. This effect is achieved through a balanced temperature, which is impossible with air cooled systems.
Make a request
Watch us on YouTube