Is using a custom ASIC firmware from BiXBiT free?

Our software for Antminer, Whatsminer is distributed for free. Please keep in mind that custom firmware includes Developers Fee, which is a reward for developers. Usually it is 1.8%-2.8% of the miner’s total hashrate which is automatically deducted during the work of the device.

Why the ASIC does not start after selecting a profile?

If you mean the very first run after flashing the device, it sometimes takes up to an hour for the inbuilt algorithm to finish configuring your ASIC.

How to bypass the “Cannot Find Signature” message during the flashing process of the ASIC?

Read our user manual for your specific miner version, it describes actions to eliminate this error, when it occurs.

Does the ASIC lose its warranty from the manufacturer when used with a custom firmware?

There is no definite answer. To avoid warranty issues, please use the firmware from the manufacturer.

Is it risky to use the custom firmware for ASIC from BiXBiT?

Absolutely not. All firmware revisions are thoroughly tested before each release. Moreover, all BiXBiT capacities have been running on these firmwares for many years.

Is BiXBiT AMS compatible with microprograms from other developers?

No. Our automated monitoring system is only compatible with our software.

Is it possible to revert the ASIC back to its original settings after using a custom firmware?

Yes, just bring back the official firmware in the usual way.

What level of knowledge is required to flash a miner?

We have specially made instructions for every version of the miner. Everything is described in a simple and clear way, so even a beginner can handle it. Besides, you are always backed with our team of technicians who are always in touch and willing to help.

All documents

Leave your email so you don't miss out!

By subscribing, you agree to our

Приложение 1.3 Вкладка Boards

Данная вкладка позволяет отключать слоты хеш-плат.

Вид вкладки Boards на устройствах с жидкостным типом охлаждения	Вид вкладки Boards на устройствах с воздушным типом охлаждения

Отображает количество слотов, причину их отключения, если таковая имеется, а также опции автовыключения плат при ошибках.

[Auto Disable Slots on Errors] – предназначена для автоматического отключения плат. В случае если плата не начала работу после превышения лимита попыток запуска (устройство перезагружается N раз. Если плата не заработала – она отключается);
[Recovery Reboot Counter] – счетчик количества перезагрузок устройства, связанных с ошибками по плате/платам;
[Max Number of Recovery Reboots] – количество перезагрузок устройства, связанных с ошибками по плате/платам, после которого проблемная плата будет программно отключена;
[Limit Boards Power] – отключает использования мощности с выключенных / неработающих плат.